2024 Wacker Neuson EZ36
Call for Price
Key Features
Availability
Brochure
Year2024
MakeWacker Neuson
ModelEZ36
Product Features
Description
EZ36 Tracked Zero Tail Excavator: Compact design and high performance
Get in and start working – with the EZ36, performance meets maximum efficiency. This zero tail excavator is ideal if compact dimensions are needed. Minimal rear overhang makes working along walls and other obstacles an easy task. The machine features intuitive operation using a joystick, display and jog dial, as well as a comfortable working environment. This leaves the operator in full control of the application. Configurable to meet a customer’s requirements, the EZ36 offers dealer-installed options, including a hydraulic thumb and rotating beacon.
Key Features
- Comfortable, fully glazed cab: The large, fully glazed and tiltable cabin with roof window offers the operator an optimal 360° visibility of his work area. This gives the operator a good view of his working area, colleagues and any dangers. Meanwhile, available despite this. It can be easily disassembled for service and repair work. All hydraulic functions of the excavator meanwhile remain available despite this.
- Optimized drive concept: The well thought-out drive concept with optimized engine-pump management allows quick and precise control of the excavator. This makes up to 15 percent faster work cycles possible. The available engine versions are low in consumption and require no exhaust after-treatment.
- VDS Vertical Digging System: The vertical digging system compensates for slopes of up to 15 degrees, making it possible to vertically excavate on a slope. This is not only ergonomic for the operator, but it also saves time and also means less excavated material. Up to 25 percent material and time savings when excavating and filling. Safe working and higher stability in sloping spaces. The same swing power over 360 degrees allows fatigue-free work with the seat position remaining the same.
- Zero Tail: When space is limited: Pivot safely, even in the tightest of spaces or right next to the wall - with the Zerotail excavator without rear overhang, no problem. Optimal working in limited working conditions, high maneuverability and time savings are guaranteed.
- 8 large tie-downs: Six large tie-downs on the vehicle chassis and two on the dozer blade make loading and transport easy and safe. Die Ösen sind perfekt platziert für eine sichere Befestigung der Maschine und sie sind auch für große Haken gut geeignet.
- Tiltable and detachable cabin: The large tiltable and detachable cabin, as well as the removable chassis covers offer excellent maintenance access. The opening angle of approx. 60° makes various inspection and repair work easier.
- Air-conditioning system: The air-conditioning system provides a pleasant and consistent temperature at the workplace. This can be set individually by hand with the blower.
- Hydraulically pilot-controlled travel pedals: The hydraulically pilot-controlled travel pedals provide comfortable and precise control without mechanical wear. Driving with foot control leaves the hands free for other functions. This saves time and increases operating comfort.
- USB port: Dirt-repellent travel gear
- Less dirt is accumulated in the slanted travel gear box and, due to its special method of construction, it is also easier to clean.: Guided track rollers outside
- In particular for lifting heavy loads, the externally located guide track rollers as well as an optimized weight distribution give the excavators a higher lateral stability.: Hydraulic swivelling dozer blade
- The swivel blade can be swiveled straight or variably by up to 25 degrees to the left or right. This way, the machine does not have to be reset in one direction as often during longer-lasting backfilling tasks. In the floating position, the dozer blade automatically follows the contour of the ground, so that the driver doesn’t have to make adjustments. Infinitely variable swivelling with floating position for more flexibility and efficiency.: Joystick-Bedienung
- Der moderne Joystick verbindet viele Funktionen mit einem Handgriff: Muldenbetätigung, Geschwindigkeitswechsel, Fahrtrichtungswechsel. Alle wichtigen Funktionen in einer Hand somit bleibt die zweite Hand immer am Lenkrad bzw. frei!: Hydraulic thumb
- The optional hydraulic thumb offers, beside a conventional bucket application, a grip function, which expands the spectrum of applications.: With this additional grip function, material can be cleared away quite easily.
- Hydraulic thumb: The optional hydraulic thumb offers, beside a conventional bucket application, a grip function, which expands the spectrum of applications. With this additional grip function, material can be cleared away quite easily.
- Flexible cylinder rod protection: Protective cylinder guards made of plastic keep the cylinder rods of lifting arm, bucket and dipper stick cylinders safe from damage, increasing service life and can save significant costs. The cylinder guard material is flexible, so no permanent damage occurs upon contact with foreign objects. Work interruption due to replacement is eliminated.
Technical Data
- Superstructure turning speed: 9.5 1/min
- Travel speed: 2.9 m/H (4.7 km/h)
- Break Out Force Bucket: 35 kN
- Break Out Force Lift Arm: 21.1 kN
- Length: 216.9 in. (5,508 mm)
- Operating weight (min.-max.): 8,196.8 - 10,901.9 lb. (3,718 - 4,945 kg)
- Digging depth (max.): 137.7 in. (3,497 mm)
- Width: 68.9 in. (1,750 mm)
- Height: 106.7 in. (2,711 mm)
- Cylinder: 3,0
- Cylinder capacity: 100.2 in. cu. (1,642 cm3)
- Effective power: 24.4 HP (18.2 KW)
- Nominal Engine speed: 2,400 1/min
- Battery capacity (nom. value): 71 Ah
- Engine type: Diesel engine
- Exhaust-gas limit: EU Stage V
- Manufacturer: Yanmar
- Engine designation: 3TNV88
- Operating pressure: 3,480 psi (240 bar)
- Flow rate max.: 31.7 gal./mi (120 l/min)
- Operating pressure slewing gear: 195 bar
- Hydraulikpump: Axial piston and 2 gear pumps
- Cooling fluid volume: 5.3 qt. US (5 L)
- Hydraulic fluid volume: 65 qt. US (61.5 L)
- Shipping weight: 7,780.1 lb. (3,529 kg)
- Drive unit: Axialpistonmotor with RGU
Dimensions
- Height with cab: 98.15 in.
- Height of dozer blade: 14.1 in.
- Total height with rotating beacon: 103.5 in.
- Width of cab: 38.6 in.
- Width travel gear: 68.9 in.
- Width of dozer blade: 68.9 in.
- Transport length: 216.82 in.
- Digging depth max., short shovel arm: 127.93 in.
- Digging depth max., long shovel arm: 137.78 in.
- Piercing depth max., short shovel arm: 83.65 in.
- Piercing depth max., long shovel arm: 92.98 in.
- Piercing height max., short shovel arm: 194.05 in.
- Piercing height max., long shovel arm: 200.23 in.
- Dumping height max., short shovel arm: 131.44 in.
- Dumping height max., long shovel arm: 137.47 in.
- Digging radius max., short shovel arm: 208.74 in.
- Digging radius max., long shovel arm: 219.93 in.
- Max. reach at ground level (short shovel arm): 212.41 in.
- Max. reach at ground level (long shovel arm): 222.26 in.
- Tail swing radius: 36.76 in.
- Boom offset max. (to center of bucket right side): 26.79 in.
- Boom offset max. (to center of bucket left side): 25.61 in.
- Stacking height max. (dozer blade above surface): 15.48 in.
- Digging depth max. (dozer blade below surface): 19.9 in.
- Length travel drive: 81.24 in.
- Max. swivel angle (arm system to the left): 70 deg.
- Max. swivel angle (arm system to the right): 45 deg.
- Boom swing radius right: 55 deg.
- Boom swing radius left: 70 deg.
Standard Components
- Liquid-cooled Yanmar diesel engine, model 3TNV88F, 3-cylinder, liquid cooled, T4F emissions compliant
- Auto idling system
- Rubber track: 300 mm
- Dozer blade
- LED work light mounted on lifting arm
- Toolkit, including grease press and operator's manual
- Watertight, lockable document box
- Dual variable displacement pump and double gear pump (42.5 x 42.5 + 26.3 + 11.3 L/min)
- Aggregate power level regulation
- Hydraulic pilot control via joystick operation
- Valve control according to ISO, DIN, SAE, PCSA and EURO
- Auxiliary hydraulic connections for two directions of travel, mounted on dipper stick
- Automatic 2-speed transmission, 2 travel speeds automatically switched, 2nd gear manually lockable
- Hydraulically servo-controlled and damped foot pedals and forward + reverse travel lever
- Hydraulic oil cooler
- Enlarged unpressurized return line (for various attachments)
- Proportional control for AUX I; discharge volume adjustable via potentiometer
- EquipCare telematics hardware - subscription ready
Edition E3601
- Long dipperstick
- Thumb mounting bracket
- Hydraulic Quick Coupler (HQC) with Easy Lock control system
- Work lights, front (LED)
- Auxiliary hydraulics (two directions) w/direct to tank setting
- Flat faced couplers on dipper
- ISO/SAE control pattern change over valve
- Rear counterweight - 337 lbs (153 kg)
- Drive signal (travel alarm)
Edition E3605
- Angle dozer blade, 4-way (25° right/left) with float position
- Long dipperstick
- Thumb mounting bracket
- Hydraulic Quick Coupler (HQC) with Easy Lock control system
- Work lights, front (LED)
- Auxiliary hydraulics (two directions) w/direct to tank setting
- Flat faced couplers on dipper
- ISO/SAE control pattern change over valve
- Rear counterweight - 337 lbs (153 kg)
- Drive signal (travel alarm)
Edition E3602
- Cabin with AC, 1 door, split front window
- Radio ready, wiring and speakers installed
- Long dipperstick
- Thumb mounting bracket
- Hydraulic Quick Coupler (HQC) with Easy Lock control system
- Work lights, front and rear (LED)
- Auxiliary hydraulics (two directions) w/direct to tank setting
- Flat faced couplers on dipper
- ISO/SAE control pattern change over valve
- Rear counterweight - 337 lbs (153 kg)
- Drive signal (travel alarm)
Edition E3606
- Cabin with AC, 1 door, split front window
- Radio ready, wiring and speakers installed
- Angle dozer blade, 4-way (25° right/left) with float position
- Long dipperstick
- Thumb mounting bracket
- Hydraulic Quick Coupler (HQC) with Easy Lock control system
- Work lights, front and rear (LED)
- Auxiliary hydraulics (two directions) w/direct to tank setting
- Flat faced couplers on dipper
- ISO/SAE control pattern change over valve
- Rear counterweight - 337 lbs (153 kg)
- Drive signal (travel alarm)
NOTES:
Please note that the product range may vary depending on the country. Under certain circumstances, the contents / products shown here may not be available in your country. The illustrations, equipment, and data shown may also differ from the current product range in your country. Optional extras may be shown that are subject to an additional charge. Subject to changes.
Delivery times can vary - subject to prior sale.
With the selection of different options, the technical data of the products can vary accordingly. Please note that equipment cannot be changed for editions.Engine
| Engine Type | Liquid-cooled diesel engine, model 3TNV88F, 3-cylinder, liquid cooled, T4F emissions compliant |
| Engine Manufacturer | Yanmar |
| Horsepower | 24.4 HP (18.2 KW) |
General
| Length | 216.9 in. (5,508 mm) |
| Width | 68.9 in. (1,750 mm) |
| Height | 106.7 in. (2,711 mm) |
| Weight | Operating: 8,196.8 - 10,901.9 lb. (3,718 - 4,945 kg) |
| Max Dig Depth | 137.7 in. (3,497 mm) |
